First, be sure you are taking the time to sort your loads properly. Don’t throw in your lighter materials with your heavy terry cloth towels. The actual drying is compromised, and you will find, not as effective as just doing a load of towels. Consider taking the lighter items and hanging in a sunny place, if not outside! On the other hand, don’t over dry your clothes. If you are a lucky one and have a moisture sensor, then be grateful and use it. Wasted time and effort is the most expensive loss to everyone.

To improve your air circulation, clean the lint screen after every use. If you think that’s not possible, then simply running the screen under wash water gives it a good scrub. Let it air dry. It will be ready to go when you are. The added bonus here is there is no build up of lint, thus eliminating a fire hazard. Use the cool down cycle and let the residual heat in the drum finish drying your clothes. Be sure in venting your dryer that rigid material is used. A plastic vent can collapse, creating a fire hazard that you are not aware of until you have a fire.

There are many good reasons to line dry. It costs nothing! Doing so on a breezy day will eliminate any stiffness in the clothes. Also, you can line dry until the clothes are just barely holding moisture, and then finish up in your dryer. No one will ever know the difference. Did you know the sun kills bed and dust mites? Free bug control! The sun also whitens and deodorizes. How do you dry in the winter time? That one’s easy. Your shower curtain rod is a very convenient indoor clothes line. In addition, racks can be purchased inexpensively and used immediately.

No related posts.

Today, with more and more of a need to go green, making an effort in your laundry room is an easy place to begin. Using cold water to wash and rinse in, you will find yourself using less water and less energy. Therefore, reducing your impact on the environment just that quickly! How cool is that? Ninety percent of the energy used to wash your clothes is in heating the water. Change the water setting to really custom fit the size of the load you are doing. Being more conscious of your techniques, and then adjusting your routine to adapt your new way of doing the laundry, will soon have you saving money and actually seeing the quality in your clothes extended.

Washing in cold water is fine for all fabrics. Using a detergent especially made for cold water is recommended by some experts. Others do not feel it’s necessary. It is advised, if you have hard water, to use liquid detergent as it does not have to dissolve. Adjust your fabric setting to the most appropriate setting. The only time hot water is really needed is when the clothing is very greasy or heavily soiled. Use of vinegar in the final rinse is highly recommended as a cheap alternative to fabric softener. It’s healthy, contains no additives or perfumes, and goes into the septic cleanly, taking no chemicals with it. Bedding and under clothes may be considered for hot water usage. For example, if your family has the flu, then by all means wash in hot water and kill any viruses and or bacteria lurking in these items. The same is true with underclothing. It’s advised to wash these in hot water to destroy any bacteria from urine or fecal matter left behind in the material.

Be aware if you are still using straight bleach in your older washing machine that you may, indeed, be rusting it from the inside out. Bleach added by the little cup in top of the machine pours directly into the wash at rinse. As it sits there waiting, it’s also eating. Eventually, you will remove the cup and find rust all around the area it sets.

Trying these handy tips will not only save you on your energy bills, but will save wear and tear on clothing, bedding and your washing machine. It’s not really hard to do these either. It just takes a little adjusting to remember to do things differently.

No related posts.